Dynamic Free Training Webinars!

/in , , /by

Calling all Professional Solar Installers! Harness the power of knowledge with APsystems’ exclusive series of FREE training webinars in July.

Designed specifically for professional installers like you, these webinars are your gateway to mastering our cutting-edge product lines. From installation techniques and setup procedures to unrivaled benefits and features.

Each webinar is packed with valuable insights and practical tips, divided into two parts. Part 1 delves into Microinverter Installation, unraveling the secrets to seamless integration. In Part 2, we’ll guide you through ECU Gateway Setup & Commissioning, along with an in-depth EMA walkthrough. Attending both parts is crucial to gaining a comprehensive understanding of the systems.

Don’t miss out on this opportunity to expand your expertise. Reserve your spot now by clicking the link below:

REGISTER HERE

JULY DATES: 5/6 and 11/12
*If July doesn’t work for you, these training webinars will take place again in August as well. Dates TBD.

Free Training Webinars

/in , , /by

If you’re a professional solar installer, you can take advantage of APsystems’ free webinar trainings! Expand upon your knowledge and capabilities by learning all about our product lines, installation, setup, benefits, features, customer accounts, site configuration, and troubleshooting on both the DS3 and QT2.

These two-part webinars will cover Microinverter Installation, ECU Gateway Setup & Commissioning, and EMA walkthrough. Each part is 1 hour long and takes place on consecutive days. It’s imperative that installers attend both days for complete system training.

 

MARCH DATES:
DS3 – March 7
ECU-R/EMA – March 8

QT2 – March 14
ECU-C/ECU-R/EMA – March 15

 

APRIL DATES:
DS3 – April 11
ECU-R/EMA – April 12

QT2 – April 18
ECU-C/ECU-R/EMA – April 19

 

MAY DATES:
DS3 – May 9
ECU-R/EMA – May 10

QT2 – May 23
ECU-C/ECU-R/EMA – May 24

 

REGISTER HERE

Training is free for professional installers. Attendees will also receive 1 NABCEP CE credit for each APsystems webinar they attend. Be sure to sign up for both events of this 2-part series!

Free Training Webinars for Professional Solar Installers

/in , , /by

Attention Professional Solar Installers: APsystems is offering free webinar trainings for you in the month of February & March*. Learn everything you need to know about our product lines, installation, setup, benefits and features, customer accounts, site configuration and troubleshooting on both DS3 & QT2.

Whether you are attending training for DS3 or QT2, there will be 2 webinars for each: Part 1 on Microinverter Installation, and Part 2 on ECU Gateway Setup & Commissioning + EMA walkthrough. Each webinar is 1-hour long, and Parts 1 & 2 take place on consecutive days. It is important that installers attend both parts for complete system training. Tips and tricks for rapid installation as well as maximizing reliability and power production will be covered.

Learn more and register for training here.

FEBRUARY DATES: Feb 21/22
*If February doesn’t work for you, these training webinars will take place again in March as well.

DS3 & QT2 Installer Training

/in , , /by

APsystems offers training in January on DS3 & QT2 microinverters at no cost to professional solar installers. Training is offered in 2 Parts—Microinverter + ECU Gateway. Each Part is a 1-hour webinar and Parts 1& 2 are offered on consecutive days. Installers should attend both parts for complete system training. The Part 2 that follows the QT2 webinar will focus on the ECU-C for C&I applications.

Attendees will learn the benefits and features of the DS3 & QT2 microinverters, as well as tips and tricks to rapid installation, commissioning the gateway and final steps in the EMA portal.

January 10 – DS3

January 11 – ECU-R/EMA

January 17 – QT2

January 18 – ECU-C/ECU-R/EMA

Summer DS3 Installer Training Webinars

/in , , /by

APsystems conducts its DS3 system installation training in 2 parts, covering microinverter installation, ECU commissioning and EMA. Installers should attend both parts for complete system training. Training is free for professional installers.

Attend Part 1 & 2 on these dates:

June 14th and 15th
July 19th and 20th
August 16th and 17th
September 27th and 28th

REGISTER HERE

DS3 & QT2 APsystems Installer Training Webinars in October & November

/in , , /by

APsystems conducts its DS3 & QT2 system installation training in 2 parts, covering microinverter installation, ECU commissioning and EMA. Installers should attend both parts for complete system training. Training is free for professional installers.

OCTOBER:

PART 1: DS3 Microinverter Installation – October 18th
Build a competitive advantage with the world’s most powerful dual microinverter. This training will cover the new DS3 microinverter product line, including the DS3, DS3-L and DS3-S. Attendees will learn the benefits and features of the DS3 series as well as tips and tricks to rapid installation, maximizing reliability and power production while minimizing returns to the job site.

PART 2: ECU-R Gateway Set Up and Commissioning, and EMA Walkthrough – October 19th
Learn the simple and convenient steps to ECU-R set up and commissioning, with an EMA installer portal walk-through. Installers will learn how to set up their customer’s gateway device to connect to the system and the internet, as well as the online EMA set up of customer accounts, site configuration and troubleshooting.

NOVEMBER:

PART 1: QT2 Microinverter Installation – November 15th
Discover the advantages of the QT2 3-Phase microinverter for C&I applications. This training will cover the new QT2 microinverter product line, including the QT2-208V and QT2-480V. Attendees will learn the benefits of QT2 microinverters for commercial solar as well as tips and tricks for rapid installation.

PART 2: ECU-C + ECU-R Gateway Set Up and Commissioning, and EMA Walkthrough – November 16th
Learn the simple and convenient steps to ECU set up and commissioning, with an EMA installer portal walk-through. Installers will learn how to set up their customer’s gateway device to connect to the system and the internet, as well as the online EMA set up of customer accounts, site configuration and troubleshooting.

REGISTER HERE

Attendees will also receive 1 NABCEP CE credit for each APsystems webinar they attend. Be sure to sign up for both events of this 2-part series!

New DS3 APsystems Installer Training Webinars in February & March

/in , , /by

APsystems will be conducting PART 1 of its system installation training on Wedensday, February 9th OR March 16th at 9am PST/12pm EST covering microinverter installation for the new DS3. PART 2 will take place on Thursday, February 10th OR March 17th at 9am PST/12pm EST and cover ECU-R gateway set up and commissioning, and EMA walkthrough. This training is at no cost to installers.

PART 1: DS3 Microinverter Installation
Build a competitive advantage with the world’s most powerful dual microinverter. This training will cover the new DS3 microinverter product line, including the DS3, DS3-L and DS3-S. Attendees will learn the benefits and features of the DS3 series as well as tips and tricks to rapid installation, maximizing reliability and power production while minimizing returns to the job site.

PART 2: ECU-R Gateway Set Up and Commissioning, and EMA Walkthrough
Learn the simple and convenient steps to ECU-R set up and commissioning, with an EMA installer portal walk-through. Installers will learn how to set up their customer’s gateway device to connect to the system and the internet, as well as the online EMA set up of customer accounts, site configuration and troubleshooting.

REGISTER HERE

Attendees will also receive 1 NABCEP CE credit for each APsystems webinar they attend. Be sure to sign up for both events of this 2-part series!

September APsystems Installer Training Webinars

/in , , /by

APsystems will be conducting PART 1 of its system installation training on Tuesday, September 28 at 9am PST/12pm EST covering microinverter installation for its current models. PART 2 will take place on Thursday, September 30, at 9am PST/12pm EST and cover ECU set up and EMA walkthrough. This training is at no cost to installers.

PART 1: QS1, YC600 and YC1000 microinverter installation
Attendees will learn the ins and outs of QS1, YC600 and YC1000 microinverters, as well as tips and tricks to streamline their installation. Learn the features and benefits of using APsystems products including installation by a single crew member, reduced overall system cost, faster installation time, fewer SKUs and stocking costs, built-in rapid shutdown compliance, and higher energy harvest over conventional inverters.

PART 2: ECU set up and commissioning, and EMA walkthrough
Our team will take you through the simple and convenient set up of the ECU-R gateway and use of the ECU App. We will then walk you through final step in the EMA web portal and how to navigate those helpful features.

REGISTER HERE

APsystems Diamond Sponsors at NABCEP Conference

/in , , , /by

APsystems is proudly sponsoring this year’s NABCEP Conference taking place August 10-12 in Knoxville, TN. Here are the key dates to view and visit APsystems at the conference:

1.  8/9 at 3:30 pm ET – Exhibitor Round Table – APsystems is participating in the exhibitor round table available to all attendees on Monday, August 9th and presenting on Best Practices for Microinverter Installation.

2.  8/10 9:00 am ET – APsystems Training Session: Reducing Your Costs Using Next-gen Multi-Module Microinverters – join APsystems for our annual NABCEP training which confers credits and will explain the ins and out of using multi-module microinverters that save installers time and money.

3.  8/11 3:30 pm ET – APsystems Training Session: Simple & Cost-Effective Solutions for Module-Level Rapid Shutdown Compliance – this session will cover the features and benefits of the Rapid Shutdown Devices (RSD and RSD-D) and Transmitter comprising APsmart’s convenient rapid shutdown system for commercial projects.

We look forward to seeing you there!

July APsystems Installer Training Webinars

/in , , /by

APsystems will be conducting PART 1 of its system installation training on Wednesday, July 21 at 9am PST/12pm EST covering microinverter installation for its current models. PART 2 will take place on Thursday, July 22, at 9am PST/12pm EST and cover ECU set up and EMA walkthrough. This training is at no cost to installers.

PART 1: QS1, YC600 and YC1000 microinverter installation
Attendees will learn the ins and outs of QS1, YC600 and YC1000 microinverters, as well as tips and tricks to streamline their installation. Learn the features and benefits of using APsystems products including installation by a single crew member, reduced overall system cost, faster installation time, fewer SKUs and stocking costs, built-in rapid shutdown compliance, and higher energy harvest over conventional inverters.

PART 2: ECU set up and commissioning, and EMA walkthrough
Our team will take you through the simple and convenient set up of the ECU-R gateway and use of the ECU App. We will then walk you through final step in the EMA web portal and how to navigate those helpful features.

REGISTER HERE